~ Wiring Duct Systems


T1 - Wiring Trunking (Module 20, 8 Slot Opening)



COLOURS: GREY RAL 7030, WHITE NCS, BLUE RAL 5015

Features
* 30 sizes
* Ideal for wiring large sized cables, normally employed in power panels
* Thick bottom and sides for maximum trunking strength and, in particular:
~ Maximun stability
~ Best holding even with heavy wiring
~ Longer duration and reliability over time
* Functional profile and bottom recess bosses for perfect compatibility with dedicated components and accessories
* Top rounded finger edge for easier wiring operations
* Wide range of trunking with different heights to optimize space use inside the panel
* All line products are certified according to CEI 23-22 and the new European EN 50085-2-3 Standards.


T1-F - Wiring Trunking with Wire Retaining Profile (Module 20, 8 Slot Opening)

COLOURS: GREY RAL 7030

Features
* 11 sizes
* Ideal for wiring large sized cables, normally employed in power panels
* Thick bottom and sizes for maximum trunking strength and, in particular:
~ Maximum application stability
~ Best holding even with heavy wiring
~ Longer duration and reliability over time
* Functional profile and bottom recess bosses for perfect compatibility with dedicated components and accessories
* Top rounded finger edge for easier wiring operations
* Restricted slot opening for wire retaining during vertical wiring operations before mounting the cover, for proper wire positioning, and circuit separation
* All line products are certified according to CEI 23-22 and the new European EN 50085-2-3 Standards.


T1-E - Wiring Trunking (Module 20, 8 Slot Opening)



COLOURS: GREY RAL 7030

Features
* 18 sizes
* Ideal for wiring small sized cables, normally employed in electric and electronic control panels
* Robust construction owing to higher numbers of fingers, thick bottom and sides. Perfect stability also for suspended installations (for instance to bridge two vertical Din Rails)
* Functional profile and bottom recess bosses for perfect compatibility with dedicated components and accessories
* Modulus of elasticity greater than 3000 MPa to allow for repeated opening and closing of fingers during wiring even at low temperature values with no risk of breakage
* Minimum design allowance to guarantee maximum accuracy and standardization in series wiring operations
* Top rounded finger edge for easier wiring operations
* All line products are certified according to CEI 23-22 and the new European EN 500-2-3 Standards.


T1-EF - Wiring Trunking with Wire Retaining Profile (Module 20, 4 Slot Opening)



COLOURS: GREY RAL 7030

Features
* 7 sizes
* Ideal for wiring small sized cables, normally employed in electric and electronic control panels
* Robust construction owing to higher number of fingers, thick bottom and sides. Perfect stability also in cantilevered applications
* Functional profile and bottom recess bosses for perfect compatibility with dedicated components and accessories
* Modulus of elasticity greater than 3000 MPa to allow repeated opening and closing of fingers during wiring even at low temperature values with no risk of breakage
* Minimum design allowance to guarantee maximum accuracy and standardization in series wiring operations
* Restricted slot opening for wire retaining during vertical wiring operations and circuit separation
* Top rounded finger edge for easier wiring operations
* All line products are certified according to CEI 23-22 and the new European EN 50085-2-3 Standards.


TD - Wiring Trunking (Module 12.5, 5 Slot Opening)

COLOURS: GREY RAL 7030

Features
* 16 sizes
* 12.5 module trunking, in compliance with DIN 43659 and CEI 23-22 standards
* Innovative coupling systems for better holding of the cover on the trunking body
* Functional profile for best trunking size/wire holding capacity ratio
* Top rounded finger edge for easier wiring operations
* Proper finger size and resiliency to allow repeated opening and closing of fingers during wiring


TPD - Wiring Trunking with Side Predetermined Score-lines

COLOURS: GREY RAL 7030

Features

*
5 sizes
* Predetermined score-lines on the sides with 18 and 23 mm holes to allow for junction of rigid and corrugated conduits
* Coupling system for better holding of the cover on the cover on the trunking body even under heavy load conditions
* Ideal for lift construction applications